Filters
Default
Shop
25 items found.
  1. Products
  2. Marine & Offshore
  3. Marine - 25 items
Pricelist: Public Pricelist
Sort By: Featured
Filters
Categories
CE08
The CE08 High pressure cleaner is the ideal tool for general cleaning applications. Mounted in a stainless steel frame - this robust unit is easy to move around and can be fitted with various accessories such as rotating nozzle, chemical intake and wet sand blasting.
CE20
CE20 is a series of electrical driven high-pressure water-blasters from 200 to 500 Bar and 16 to 38 L/min in flow capacity. The standard machine are with pneumatic rear wheels with parking brake, castor front wheel. The “Slim version” is narrower and has solid rear wheels with parking brake instead. The frames are made up in hot-dip galvanized and powder coated pressed sheet metal parts with all enclosing side frames in stainless steel. The standard model with pneumatic tyres measures 1060 x 760mm. The “Slim” model are 1060 x 500mm. Both are 850mm high. The standard and slim versions share all other specifications.
CE20-500
The CE20-500 is our bestseller which you can find onboard more than 5000 vessels worldwide. It was specially made for operation on container vessels but are used on all type of vessels. The compact design combined with the low water flow and 500 bar pressure makes it an ideal tool for onboard maintenance. Easy to operate and service means that the crew can maximise the production output with the limited time they have to do repair of coatings and damaged surfaces.
CEX20
CEX20 is a series of electrical driven high-pressure water-blasters from 200 to 500 Bar and 16 to 38 L/min in flow capacity which are ATEX approved. The standard width machine are with pneumatic rear wheels with parking brake, castor front wheel. The “Slim version” is narrower and has solid rear wheels with parking brake instead. The frames are made up in hot-dip galvanized and powder coated pressed sheet metal parts with all enclosing side frames in stainless steel. The standard model with pneumatic tyres measures 1060 x 760mm. The “Slim” model are 1060 x 500mm. Both are 850mm high. The standard and slim versions share all other specifications.
CEX20-500
CEX20 is a series of electrical driven high-pressure water-blasters from 200 to 500 Bar and 16 to 38 L/min in flow capacity which are ATEX approved. The standard width machine are with pneumatic rear wheels with parking brake, castor front wheel. The “Slim version” is narrower and has solid rear wheels with parking brake instead. The frames are made up in hot-dip galvanized and powder coated pressed sheet metal parts with all enclosing side frames in stainless steel. The standard model with pneumatic tyres measures 1060 x 760mm. The “Slim” model are 1060 x 500mm. Both are 850mm high. The standard and slim versions share all other specifications.
CH20 SERIES
CH20 is a series of hydraulic powered high-pressure water-blasters from 350 to 500 Bar and 16 to 23 L/min in flow capacity. The machine are with pneumatic rear wheels with parking brake, castor front wheel. The frames are made up in hot-dip galvanised and powder coated pressed sheet metal parts with all enclosing side frames in stainless steel. It measures 1060 x 760mm and 850mm high. One central lifting eye.
CH40 SERIES
CH40 is a series of hydraulic powered high-pressure water-blasters from 230 to 1380 Bar and 13 to 74 L/min in flow capacity. The machine are with pneumatic rear wheels with parking brake, castor front wheel. The frames are made up in hot-dip galvanised and powder coated pressed sheet metal parts with all enclosing side frames in stainless steel. It measures 1600 x 1050mm and 1150mm high. One central lifting eye.
CD160 SERIES
The CD160 range of water-blasters and water-jetting machines goes from 200 to 2500 Bar with pump flows from 25 to 300 L/min. The pump are driven by a 4 cylinder water cooled Turbo charged and intercooled SISU diesel engine and the all enclosing frame is made in hot dip galvanised steel for durability and corrosion resistance and is primed and painted for a nice appearance. The machine foot print is 2250 x 950mm of floor space. The frame are equipped with rubber feet under all four corners and the machine have forklift pockets as well as lifting eyes in all four corners. The machines have galvanised roof plates with side railings for protection and storage of for example high pressure hoses.
CD25 SERIES
The CD25 range of machines are compact water-blaster machines with high pressure pumps from 170 to 500 Bar, and water flow from 17 to 42 L/min. The pump are driven by a 3 cylinder water cooled Kubota diesel engine and the sturdy all enclosing frame is made in stainless steel for durability and corrosion resistance and powder coated for a nice appearance. The machines have a small foot print off 1200mm x 800mm, the same size as an EUR Pallet. The frames stays solid in place on 4 big rubber feet, one in each corner, and the compact machine have forklift pockets as well as one central lifting eye for easy moveability.
CD50 SERIES
The CD50 range of water-blasters and water-jetting machines goes from 230 to 2000 Bar with pump flows from 7 to 74 L/min. The pump are driven by a 4 cylinder water cooled Toyota diesel engine and the all enclosing frame is made in hot dip galvanized steel for durability and corrosion resistance and is primed and painted for a nice appearance. The machine takes up 1550 x 920mm of floor space. The frame are equipped with rubber feet under all four corners and the machine have forklift pockets as well as lifting eyes in all four corners. The machines have galvanized roof plates with side railings for protection and storage of for example high pressure hoses.
Charlie Pendant Stations For Auxiliary Control with 2 to 3 Push Buttons
A control device for all industrial machinery. It operates as an auxiliary controller of electrical motors through a power interface, such as a contactor or PLC. Designed for heavy duty, Charlie is aimed specifically for the industrial market.
NPA Pendant Stations For Auxiliary Control with 2 to 12 Push Buttons
Pendant station for auxiliary control of industrial machines. Sturdy and handy, NPA is a classic control station, available with plastic pushbuttons or with dust-tight rubber pushbuttons, with up to 3 speed switches.
7551-7552 Position limit switch
Cross position limit switches designed for controlling the movement of overhead travelling cranes, hoists and complex machine tools. Heads with different types of rods and movement for speciic applications.
X-FSC / X-FRZ Position limit switch
Cross position limit switches designed for controlling the movement of overhead travelling cranes, hoists and complex machine tools. Heads with different types of rods and movement for speciic applications.
FOX Rotary limit switch
Rotary limit switch used to control and measure the movement of industrial machines by measuring the rotation angle and/or counting the number of revolutions of a shaft. Fox is used on wind turbines to control the position of the nacelle or the pitch angle of the blades
SPA Pendant Stations For Auxiliary Control with 2 to 20 Push Buttons
Pendant station for auxiliary control, sturdy and reliable, designed for heavy industry. Modular enclosure with actuators arranged on a double row to pair opposite functions and keep size compact.
MIKE Pendant Stations For Auxiliary Control with 4 to 15 Push Buttons
Pendant station for auxiliary control of modern ergonomic shape, easy to handle, user friendly and sturdy. Mike is the result of careful analysis of ergonomic aspects and it is rich in high-performing features to suit the most demanding requirements.
BASE Rotary limit switch
Rotary limit switch used to control and measure the movement of industrial machines. Its compact size make it suitable for use in narrow spaces.
10A/30A Slip ring collector
Slip ring collector consisting of rings coupled with brushes, designed to allow current to pass from a ixed to a rotating part and used to supply crane motors and cable winders.
10A Slip ring collector
Slip ring collector, consisting of rings coupled with brushes, designed for small jib cranes. Compact sized and equipped with 4 rings.